In Toronto, a professional paint job involves a meticulous three-stage process. This detailed auto paint Toronto process ensures a flawless finish and lasting durability. It enhances the aesthetic appeal and protective abilities of the vehicle significantly. If you are interested in getting an auto paint job in Toronto, then you are at the right place. First-timers are super curious to know what the experts do with their ride. So, this blog is for all those curious souls who want to understand the process. From the first stage to the last one, this guide sheds light on all. Let’s get started and see how auto-paint works.
What is 3-Stage Auto Paint Correction?
It is a tried and tested automotive service that removes visual imperfections from the vehicle’s paintwork. Each step of the process needs thorough defect removal to restore the pristine condition of the car. All the steps are performed by certified auto paint correction technicians. Let’s walk through all the steps that experts follow to deliver you the best look for your car.
Prep the Vehicle
It is not a part of the 3-stage auto paint Toronto process but is performed to have a clean surface to work on. Experts remove all the dirt and contamination because if they don’t it will leave a mark during buffing. So, everything is taken care of before the actual work. Many automotive experts use chemical agents to lift the dirt. Then the vehicle is hand-washed gently. After drying with a microfiber towel, the car is inspected for contamination level. Claybar works the best against stubborn marks and contaminants. The vehicle is rewashed and dried after this step. Once the car is dry, it is ready for the auto-paint process. Here’s a list of equipment you need for auto paint Toronto:
- 1200 x 2000 girt wet and dry sandpaper
- A power sander
- Masking tape
- Making paper
- Spray gun
- Air compressor
- Paint thinners
- Primer
- Acrylic topcoat
- Clear coat lacquer
- Buffer
- Safety glasses and face mask
- Paint
Stage 1: Heavy Defect Removal
The first step of 3 stage paint correction is cutting or buffing the vehicle. All the steps involved in buffing are performed by machines. The rotary machine removes deep scratches and swirl marks. Whereas, a dual-action polisher is for removing minor to moderate defects. Both machines have heavy-cut foam or wool pads to remove the imperfections. The chemical used depends on the condition of the paintwork. For vehicles in bad condition, experts prefer using heavy chemicals.
Once the desired results are achieved, experts work on smaller regions for the cutting action. After buffing and cutting, the vehicle is washed again. Remember, it’s a touchless method. The vehicle is buffed and freed from the contaminants for a reason.
Stage 2: Paint Refinement
The next step is paint refinement. Auto paint professionals fix all the flaws in the vehicle’s paintwork aiming to make it look like the original. This step should be performed thoroughly to achieve the best results. The more detailed this step is, the more perfect the final results will look. In this step, a dual action polisher is coupled with a cut pad and a polisher.
Pro Tip:
Work in small sections to ensure proper application and get a blended look. Do a patch test, before applying the chosen chemical or polisher to the entire vehicle.
If you are satisfied with the result, continue applying it to the rest of the vehicle. Auto-paint technicians ensure the vehicle is clean during this step to achieve the best results. In case, the vehicle gets dirty, it should be rewashed.
Stage 3: Final Polishing
This stage is commonly known as jewelling too. It is performed to give a glossy look to the car’s paint. Moreover, it also adds a subtle clarity to the paint. Experienced technicians use a fine polish coupled with a dual-action polisher on a finishing foam pad. Moreover, the experts work in a panel at a time. Once it is applied to the entire vehicle, the paint is inspected for one last time. It ensures the vehicle is polished entirely leaving no residues.
Protection, Last Stage Product, or LSP
It is a part of the last stage of paint correction. In this, the freshly coated paint is protected using a sealant or protection film. You can go for a month-long paint sealant or lifetime protection with ceramic coating. The choice is yours. You can choose the protection according to your needs and budget. After protection, the vehicle is inspected for the final look. Then, it is given time to cure properly. Once it is fully cured, the vehicle is ready to pick up.
If you are wondering how long is the cure time, it is around 8 to 30 hours long. It breathes a new life into your car’s original paintwork.
Conclusion
Auto painting in Toronto is the #1 choice of car owners who want to restore the showroom’s new shine. The three-stage process is comprehensive and thoroughly removes all the imperfections from the vehicle’s surface. An automotive paint job is tough and only a skilled professional can offer you a flawless finish. Through the auto painting process, you can enjoy a fresh look on your car and protect it from damage.
FAQs
What is the 3-step paint process?
The three steps of the paint process begin with applying the base coat. Then a lacquer is applied to achieve the final sparkling shiny look.
References:
https://www.torontobuffing.com/3-stage-paint-correction-explained.html